Looking for the tool that I can use on the 6 hole screws that the S-Tek system uses to hold the back plate pad and the weight pocket holders in place? Not sure but I think it also used on the Hydros BC systems. Want to be able to remove the pad from the SS plate to the Alum plate as needed instead of going to the dive shop all the time.
S-Tek Pad Screw Tool
- Thread starter Dodinas
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
Three-Pin Socket for Scubapro Hydros Pro BCD Colour Kit
This three-pin socket is designed to facilitate the change of Scubapro Hydros Pro Colour Kit. The pins of the tool engage with grommet / nut (part# 21.782.005) of the BCD. The tool locks the grommet in place while screw on the opposite side is tightened or loosened. The use of the tool will...
scuba-clinic-tools.com
- Messages
- 5,533
- Reaction score
- 4,943
- # of dives
- 2500 - 4999
and butcher it like a peasant butcher butchers things that they shouldn't be butchering
Similar threads
