Doubles manifold leak

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Probably an older manifold. Is the problem...
Newer ones probably have a bigger hole...
The DIN nipple (this is what it’s called in the atomic service manual) has slightly larger diameter on this reg vs two other atomics I just measured. Replacing is going to be easiest. I’m headed to see if I can just replace the nipple or will I need a full DIN assembly.
Thank you @Gone for diving for you help
 
The only disadvantage is that an other regulator may have the same problem....

Probably from the era that nobody had standardized din measurements...
 
Just drill it out with everything assembled resurface the face then crack the valve to blow out the swarf

download.jpg
 
That would be some avalanche
 

Back
Top Bottom