Question Anyone diving the Waterproof G2 7mm three finger glove (mitt)?

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

MrVegas

Contributor
Messages
416
Reaction score
293
Location
Ohio
# of dives
200 - 499
Just curious if anyone out there is currently using the Waterproof G2 3 FINGER 7MM glove. My XS Scuba Dry Five Gloves are getting a little torn up (after 4 years), and I was trying to decide on whether to just by another set of those or spend the extra money on the Waterproof 7mm mitt. They are expensive, but if they are that much warmer without much loss in dexterity, it might be worth it. (Yes, I do have dry gloves too, but I am stubborn and prefer wet gloves.)
 
Have a pair of these also and they really are a good bit of kit that surprisingly didn’t take any getting used to even with bailout cylinders,, very warm.
 
Thanks for the replies. Any thoughts on sizing? I am, of course, right on the edge of two sizes. (Someday I would like to actually be right in the middle of one size on a size chart.)
 
Afraid I can’t help you there, I can measure my hands and tell you the size I take if it’s of any help at all?
 
Very warm gloves, had these but they were unfortunately too big. I'd say the run a bit small. I use size large in regular 5mm waterproof gloves, but xl would be right for the mitts. Mine were 2xl and too big. YMMV
 

Back
Top Bottom