LanceRiley
Contributor
Hi I’m a bit confused on how to do the hose routing. Some suggests the caps face outside and some advise caps facing inward. And which ports to use ? The ones in front or the ones in the back?
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
^thisThey come in a pair(L & R) and there is ONLY one way you mount them on a twin set because every port is pointing downward.
Hi I’m a bit confused on how to do the hose routing. Some suggests the caps face outside and some advise caps facing inward. And which ports to use ? The ones in front or the ones in the back?
Should have been withdrawn yrs ago.caps in because the HP port needs to be on the outside
Use the ports farther away from the valve in order to minimize hose bending
These really are IMO a garbage regulator design for what they are marketed for and I tell everyone that asks about them to only bother with them for stage/deco bottles and not to even try to deal with them on twin sets. Your hoses are being bent in all sorts of directions and if you have short neck valves, with pretty tight bend radii