zeagle rangertech

[lalaboy]

Hi everyone.
New to the board, and in need for some help.
I have the above mentioned bc but its incomplete.
Its missing both weight pouches and the ripcord on one side.
I am forced to use a weightbelt with it.
Does anyone know where I could get these items, local diveshops dont carry them.
any help is appreciated

thanx

 

[1_T_Submariner]

Hey Lalaboy,
You might get a fast response in the below forum. I dive a Zeagle ranger, great product.

http://www.scubaboard.com/forums/zeagle/

The Weight pouches are available (there are 2 sizes).

Zeagle Weight Pouches - 18 lb. Capacity - Weight Thingies, Zeagle Accessories, Zeagle, Zeagle Weight Pouches - 18 lb. Capacity - Weight Thingies

 

[GDI]

Zeagle Systems - Scuba Diving Equipment Manufacturer or from SB here contact scottzeagle

 

[DiveMaven]

You can also call ScubaToys and ask them for help on parts, etc.

 

[1_T_Submariner]

You can also call ScubaToys and ask them for help on parts, etc.

Check the link in my post to the yellow thingy's.

 

[lalaboy]

thank you all. Now i got the pouches I need only the ripcords.

 

[ScottZeagle]

Hi everyone.
New to the board, and in need for some help.
I have the above mentioned bc but its incomplete.
Its missing both weight pouches and the ripcord on one side.

I am going to assume that you bought the BC used....yes??

Very few shops want to mess with repairing the ripcord system, so you will probably need to send it in to us. If you bought the BC new and it has these issues, please take it to the place you bought it from and let them get it fixed for you...otherwise there will be a charge.

Thanks,

Scott

 

[lalaboy]

if it needs repair, than let it be repaired.
Would you give me an adress pls to send it to? Maybe an aproximately figure?
and thank you Scott for helping out
Lajos

 

[Chad Carney]

lalaboy,

It's just a guess, but a deployed Zeagle ripcord kinda looks like something is missing.
There is only one red handle on the left side of the BC. It's a singl point pull system.
If it's there push the mono cord back into the BC, and look under the left side pocket.
You should see white line loops and the red or orange colored mono cord. The short one weaves the left pocket closed, and the other one needs to be stuffed through to the right side pocket, where it will lace up that side.

Does it look at all like I'm describing? If it does it's a simple rethreading required. See the video here. Home

If none of the mono cords are there, then you'll need to send it to Zeagle. Call for an RA# first. 813-782-5568.

Chad
Zeagle FL rep.