Wanted zeagle BCD inflator assembly and/or remote exhaust valve

[scubatrax]

I am looking for a zeagle BCD inflator assembly and/or remote exhaust valve. Does anyone have an old zeagle BCD for parts? The parts are for a ranger, but I believe many zeagle pieces are interchangeable.

Steve
772 532 6537

 

[EdC]

Steve, is it pre-2014 or newer? Zeagle changed the threads on their bladders around that time and it will make a difference for the exhaust valves.

 

[scubatrax]

I believe it is newer than 2014. However, I need both parts, the flange assemble and the exhaust valve. So as long as they fit together. If you have a exhaust valve how much are you asking?

Thanks,

 

[EdC]

Sorry, I don’t have either but was just trying to help clarify which exhaust you were looking for in case someone did. The difference between the valves is the threading to the bladder so a pre-2014 won’t work on a newer bladder and vice versa. Obviously inflators will work interchangeably.

 

[lexvil]

Try Huish/Zeagle they may help or these guys

Zeagle Bladders

Zeagle Individual Bladder Systems

www.mcssl.com

 

[coldwaterlloyd]

are you looking for one of these ...

 

[scubatrax]

I am looking mostly for the other end where it attaches to the BCD and the BCD attachment point or bladder flange.

 

[coldwaterlloyd]

this unit is from a 2018 zeagle , LL

 

[scubatrax]

That is one of the 2 pieces I need. The other would be the flange that fits in the BCD hole. See pic.

 

[Curious_George]

You should have started with sharing the hole in your BC. I believe the easiest solution is this if your bladder hole is the correct size:

DGX Bladder Flange Assembly

A replacement bladder flange for older style BCs that includes the inner and outer fitting plus the intermediate seal. Please read the description details carefully for compatibility advisory.

www.divegearexpress.com

From there you have a bunch of choices including this:

Dive Rite Plain (Non-Exhaust) Elbow w/Nut

The plain BC elbow, preferred by experienced divers, can be used to replace a pull-to-dump elbow.

www.divegearexpress.com

If the Zeagle bladder hole is too big then you are stuck with whatever zeagle has similar to the above.