Yoke to DIN

[spc751]

How difficult and expensive is it to convert a Legend LX with ACD from yoke to DIN?

 

[EdC]

Very easy, having the correct shallow socket is the hang up unless you can get a large adjustable wrench on the bolt that holds the yoke on. I’m not sure what your local shop would charge but it’s literally 5 minutes worth of work.
Aqua Lung 300 Bar DIN Conversion Kit for Titan Regulators

 

[Zef]

Depends where on the globe you are....the part you need is about twice as expensive in the US as in Europe.

-Z

 

[Scubaboy0811]

How difficult and expensive is it to convert a Legend LX with ACD from yoke to DIN?

The long mystery has been solved because I see a ton of folks trying to figure out how to convert yoke to din. Here it is
Call Aqua lung tech support at 760-597-5000 and give them your serial number of your first stage, then ask them what is the part number for the din conversion kit. Then give John a call at 610-631-2288, he is the owner at northeast scuba supply in pa. He will use the number Aqua lung tech support gives you and send you your kit to convert. Very simple and very easy. He does them all day long.
Hope this helps fellow divers like it did me!