Worthington X7 Steel 120 Cylinder

[tsortor]

I have a Worthington X7 Steel 120 cylinder for sale. Original hydro stamp reads 01/2010 and most recent vis inspection is 03/2012. Thermo DIN only valve. Asking $285.00 Local pickup in San Diego County only. Worthington Cylinders
Cylinder	Service Pressure (psi)	Diameter (inches)	Height (inches)	Weight Empty (pounds)	Buoyancy Full : Empty (pounds)
X7 Steel 65	3442	7.25	16.7	25.1	- 8.7 : - 3.9
X7 Steel 80	3442	7.25	19.7	28	- 9.0 : - 3.0
X7 Steel 100	3442	7.25	24.0	33	- 10.0 : - 2.5
X7 Steel 120	3442	8.00	24.0	38	- 11.0 : - 2.0
X8 Steel 119	3442	8.00	24.0	42	- 10.9 : - 2.0
X8 Steel 130	3442	8.00	25.5	43	- 11.7 : - 2.0

Comparison Only - Aluminum 80	3000	7.25	26.10	31.4	- 1.4 : + 4.4
Buoyancy specification for cylinder and valve in seawater. Height dimension is cylinder only, i.e. less valve.

 

[Paleface]

Your chart is wrong. The 120 is 7.25 dia. And I think 29" tall.

 

[Sonic04GT]

Your chart is wrong. The 120 is 7.25 dia. And I think 29" tall.

This is correct. X7 series are all 7.25, and it's 28".

 

[tsortor]

Your chart is wrong. The 120 is 7.25 dia. And I think 29" tall.

This is correct. X7 series are all 7.25, and it's 28".

Haha, you're both wrong. The chart is correct, it's the shorter, fatter cylinder. It is indeed 8" diameter x 24" high.

---------- Post Merged at 08:08 PM ---------- Previous Post was at 08:06 PM ----------

Correction again, it may actually be an X8 cylinder rather than the X7. In any case, it is 8" x 24".

 

[Sonic04GT]

If that's the case, then it would have to be an X8 119. Not trying to insult you, but people should accurately know what they're buying.

XS Scuba Worthington Steel Cylinder Specifications

 

[Ericlt1]

The pic with the VIP sticker shows x8-119.

 

[tsortor]

The pic with the VIP sticker shows x8-119.

I stand corrected! Now somebody buy this thing.