What 1st stage is this?

[the_dragon_no1]

Salvaged of the sea floor and sonic/acid cleaned. Not seen much use at all!
Was a part of an Argon inflation system/tank. Tank is of course garbage..

Okay for cold water use i guess? (Since i found it in the same...)
Also interested in where i can get service kits for it. ( Not a tech, but i service my own Apeks's...)

 

[Ghetto Diver]

Cressi xs2?

 

[the_dragon_no1]

Yeah, sure looks like it Thanks!
Found the service manual for the XS2 and looks alike inside also.

 

[Ghetto Diver]

Good find..all I get is lead, knives, snorkels and fishin' poles
As you said, it should be an easy one to rebuild, even without a kit.

 

[DepthCharge]

Valve looks like the one from the OMS (faber) 8 cft. argon tank. Won't fit anything else.
John

 

[the_dragon_no1]

Valve looks like the one from the OMS (faber) 8 cft. argon tank. Won't fit anything else.
John

Okay thanks. A buddy told me this was an older "standard" valve (smaller diameter threads).

 

[runsongas]

If it is a 1/2 inch thread, there are older 3aa tanks it may fit. You will have to check straight vs tapered thread though.