Wanted Wanted: USD triple 30cf ABS [bent manifold] Straps and or Delrin [?] Mounting Blocks

[Wallowa]

Looking primarily for a set of the locating blocks mounted over the center tank and that the straps go through and serve as the mounting points for the BCD/plate....

Thanks...Phil

 

[Skip Y]

Phil I have a set of these. I use a piece of pvc pipe as the spacer and hose clamps to hold the tanks tight. Cut the pvc about 1" long, then cut it in quarters. Use a hair dryer to soften the pvc a change the contour to the same as your tanks, Put the PVC in between tanks and use a hose clamp to hold it all tight