Veo 250 Dive Log Issue

[Hragin]

I recently purchaed this computer, made two dive, log show details, no problems. Two weeks later I made another pair of dives, worked fine in showing details during and between dives, but when I went to review dives 3 & 4 later in the week, I can't get to them in "log" mode.

I can still scroll through the first 2 dives, but not the next two.

Any ideas?

Thanks

 

[Doug Krause]

I suspect that the dive numbers may be the issue - numbering restarts at '1' for each new series. You likely have 2 sets of dives, both with dive no 1 and 2.

 

[Hragin]

Thanks for the reply. If the unit is supposed to keep a record of 25 dives, how would I review each "series?' Is there any way to access all the dives?

The manual is of little value in describing anything associated with this feature.

 

[pafindr]

Like Doug mentioned you are seeing all four dives but you see it as:
Dive #1, Dive #2, Dive #1 (actually dive #3), Dive #2 (actually dive #4) look at the details, by clicking the side button, and they will probably be different.

 

[Hragin]

I will try it. Thanks

 

[Hragin]

Doug, Pafindr, Thank you both. It was two series. I appreciate the help.