anybody?
Used drysuit I'm 6'1" 275 lbs
- Thread starter pelagic_by_nature
- Start date
Please register or login
whodunit68
Contributor
OP
PM sent
OP
Still looking
Hi-
This OS Systems SARR drysuit is a front entry suit with about 5 dives on it. Its in excellent condition. It comes with the dry gloves and wrist rings, heavy undergarments, fleece booties, fleece under gloves, hood, bag (has the previous owners name on the end of the bag in marker) neck ring, seals have not been cut and ankle weights.
Size 12/13 boots. I'm 6'1 280 w/ 42" waist and size 13 shoe and I fit in it. It also has the optional relief zipper, leg pouch on right side and reflective tape and orange neoprene gloves. From the website:
* Materials: Tough, Military Spec high tenacity 210 denier High Count nylon in Sea Rescue Orange for high visibility. High Count nylon contains more threads woven into each square inch of fabric. The resulting fabric has a very tightly packed weave for extraordinary abrasion and puncture resistance. All seams are made with quadruple interlocking stitching for strength and then fusion sealed inside for water tightness.
* Waterproof Coating: The 210 HC nylon is triple coated with 6-7 ounces of polyurethane on the inside of the fabric for protected waterproofing, Two solutions coats of polyurethane are impregnated deep into the fibers of the nylon. A high molecular density layer of polyurethane is then laminated to these solution coats for total waterproofing and for internal abrasion resistance.
* Testing: Each suit is individually pressure tested underwater
* Safety: Red and orange reflector tape down arms and around wrists
* Reinforcing: 500 Denier Cordura, textured nylon for improved slip control. Includes Butt pad (not shown) and patented Wraparound Knee pad providing double layer protection for the front and back of each lower leg. Pad extends up the front of the thighs and into the lower lap area. US Patent #4,438,019
* Valves: SiTech inlet/automatic exhaust with gaskets installed are standard. Three year warranty.
* Seals: Made in USA, Longlife Latex rubber neck and wrist seals are thicker and more durable (minimum thickness .026") yet thin and flexible enough to insure a comfortable fit.
* Footwear: Rubber diving drysuit boots with heavy duty soles are standard. Features include low profile toes that fit easily in fins, reinforcing for wear areas, fin keeper heels and easy flex ankles. Latex socks are a no charge option.
* Entry: Horizontal Front entry using a diving grade #8 brass tooth zipper.
I'm selling it for a guy who is now unable to dive. The suit alone was $1,500. Asking $850 + $20 shipping - [-]Also have a pair XXL Slip Stream Fins used once[/-] - $30 - FINS SOLD
Thanks
This OS Systems SARR drysuit is a front entry suit with about 5 dives on it. Its in excellent condition. It comes with the dry gloves and wrist rings, heavy undergarments, fleece booties, fleece under gloves, hood, bag (has the previous owners name on the end of the bag in marker) neck ring, seals have not been cut and ankle weights.
Size 12/13 boots. I'm 6'1 280 w/ 42" waist and size 13 shoe and I fit in it. It also has the optional relief zipper, leg pouch on right side and reflective tape and orange neoprene gloves. From the website:
* Materials: Tough, Military Spec high tenacity 210 denier High Count nylon in Sea Rescue Orange for high visibility. High Count nylon contains more threads woven into each square inch of fabric. The resulting fabric has a very tightly packed weave for extraordinary abrasion and puncture resistance. All seams are made with quadruple interlocking stitching for strength and then fusion sealed inside for water tightness.
* Waterproof Coating: The 210 HC nylon is triple coated with 6-7 ounces of polyurethane on the inside of the fabric for protected waterproofing, Two solutions coats of polyurethane are impregnated deep into the fibers of the nylon. A high molecular density layer of polyurethane is then laminated to these solution coats for total waterproofing and for internal abrasion resistance.
* Testing: Each suit is individually pressure tested underwater
* Safety: Red and orange reflector tape down arms and around wrists
* Reinforcing: 500 Denier Cordura, textured nylon for improved slip control. Includes Butt pad (not shown) and patented Wraparound Knee pad providing double layer protection for the front and back of each lower leg. Pad extends up the front of the thighs and into the lower lap area. US Patent #4,438,019
* Valves: SiTech inlet/automatic exhaust with gaskets installed are standard. Three year warranty.
* Seals: Made in USA, Longlife Latex rubber neck and wrist seals are thicker and more durable (minimum thickness .026") yet thin and flexible enough to insure a comfortable fit.
* Footwear: Rubber diving drysuit boots with heavy duty soles are standard. Features include low profile toes that fit easily in fins, reinforcing for wear areas, fin keeper heels and easy flex ankles. Latex socks are a no charge option.
* Entry: Horizontal Front entry using a diving grade #8 brass tooth zipper.
I'm selling it for a guy who is now unable to dive. The suit alone was $1,500. Asking $850 + $20 shipping - [-]Also have a pair XXL Slip Stream Fins used once[/-] - $30 - FINS SOLD
Thanks
Last edited:
Hi-
This OS Systems SARR drysuit is a front entry suit with about 5 dives on it. Its in excellent condition. It comes with the dry gloves and wrist rings, heavy undergarments, fleece booties, fleece under gloves, hood, bag (has the previous owners name on the end of the bag in marker) neck ring, seals have not been cut and ankle weights.
Size 12/13 boots. I'm 6'1 280 w/ 42" waist and size 13 shoe and I fit in it. It also has the optional relief zipper, leg pouch on right side and reflective tape and orange neoprene gloves. From the website:
* Materials: Tough, Military Spec high tenacity 210 denier High Count nylon in Sea Rescue Orange for high visibility. High Count nylon contains more threads woven into each square inch of fabric. The resulting fabric has a very tightly packed weave for extraordinary abrasion and puncture resistance. All seams are made with quadruple interlocking stitching for strength and then fusion sealed inside for water tightness.
* Waterproof Coating: The 210 HC nylon is triple coated with 6-7 ounces of polyurethane on the inside of the fabric for protected waterproofing, Two solutions coats of polyurethane are impregnated deep into the fibers of the nylon. A high molecular density layer of polyurethane is then laminated to these solution coats for total waterproofing and for internal abrasion resistance.
* Testing: Each suit is individually pressure tested underwater
* Safety: Red and orange reflector tape down arms and around wrists
* Reinforcing: 500 Denier Cordura™, textured nylon for improved slip control. Includes Butt pad (not shown) and patented Wraparound Knee pad providing double layer protection for the front and back of each lower leg. Pad extends up the front of the thighs and into the lower lap area. US Patent #4,438,019
* Valves: SiTech inlet/automatic exhaust with gaskets installed are standard. Three year warranty.
* Seals: Made in USA, Longlife Latex™ rubber neck and wrist seals are thicker and more durable (minimum thickness .026") yet thin and flexible enough to insure a comfortable fit.
* Footwear: Rubber diving drysuit boots with heavy duty soles are standard. Features include low profile toes that fit easily in fins, reinforcing for wear areas, fin keeper heels and easy flex ankles. Latex socks are a no charge option.
* Entry: Horizontal Front entry using a diving grade #8 brass tooth zipper.
I'm selling it for a guy who is now unable to dive. The suit alone was $1,500. Asking $850 (OBO) + $20 shipping - Also have a pair XXL Slip Stream Fins used once - $30
Thanks
That's an AWESOME deal - I would jump all over this if the suit fit me (I am taller & slimmer) This will not last long....
PM sent on the fins
Suit is sold to .....ME - fits great.
What a deal - this suit ROCKS!!!!
Thanks Ed.
What a deal - this suit ROCKS!!!!
Thanks Ed.
OP
Bought the Pinnacle from whodunit68 - perfect fit. Thanks, everyone.
whodunit68
Contributor
glad it worked out Pelagic_by_nature!
RonzoTheGreat
Contributor
close this one up fellas
Similar threads
