Wanted Trim weight pocket

[rkrk]

Hi. Looking for two small trim weight pockets that can be put on a web belt. Perpendicular alignment preferred but horizontal ok. Quick release not essential.

Thanks in advance
Rich

 

[weeksd]

I have a small weight pocket for bullet size lead. 1inch x 6 inch interior with belt loop. $10usd

 

[rkrk]

I have a small weight pocket for bullet size lead. 1inch x 6 inch interior with belt loop. $10usd

Thanks - I need a pair and was thinking more of a square pocket - rich

 

[rhwestfall]

XS Scuba Single Weight Pocket

Does your tank get to buoyant near the end of a dive and you keep getting banged in the head from the valve, or maybe you would like to relieve your hips from all that weight from your weight belt or y

www.scuba.com

 

[PR_SMITH]

I picked up a set of 4 for 20 Canuck Bucks on Amazon

 

[rkrk]

I picked up a set of 4 for 20 Canuck Bucks on Amazon

thanks

 

[inquis]

I've been very happy with a pair of these. The back is nicely sized so that a bit of inner tube will keep them from sliding (vastly superior to a tri-glide).

OMS Small Trim Weight Pocket {4 lb | 1.8 kg}

The OMS Small Trim Weight Pocket {4 lb | 1.8 kg} is ideal to hold just a few pounds of additional weight on your waist or tank strap.

www.divegearexpress.com

 

[rkrk]

I've been very happy with a pair of these. The back is nicely sized so that a bit of inner tube will keep them from sliding (vastly superior to a tri-glide).

OMS Small Trim Weight Pocket {4 lb | 1.8 kg}

The OMS Small Trim Weight Pocket {4 lb | 1.8 kg} is ideal to hold just a few pounds of additional weight on your waist or tank strap.

www.divegearexpress.com

Thanks - if I may ask, inner tube where?

 

[inquis]

Thanks - if I may ask, inner tube where?

Trim Pocket Anti-slide Keeper

I'm not sure this is truly "DIY", it's more a simple trick to stop trim pockets from sliding about on your harness, belt or cam bands between dives. Useful if you don't want to splash cash on the fancy trim pockets with sewn in keepers. 1. Cut a section of 50mm bicycle inner tube ±5mm...

scubaboard.com