Transplate Fit Question

[Rock2r]

DR,

My tee shirt size varies between a 2X and XL and I am slowly dropping a few pounds.

If I purchase a Transplate in XXL and it starts becoming too loose (big), will I be able to snug it up as I approach an XL frame. or will I be stuck with a harness I can no longer wear? Afraid if I purchase an XL it will be too snug until I shed a few more.

I will be attaching it to a S/S plate, STA and older style 30lb Venture-if it matters.

Help

 

[Dive Rite]

Hi Rock2r,

You can always switch out the shoulder straps later on. The only difference between an XL and XXL is the length of the shoulder straps. It will take some reweaving on your part (kinda a hassle), but you at least have the option.

Also, keep in mind we make a Tall TransPac. You can get our TransPac in size Med-XXL Tall if you are long waisted or over 6'5" tall.

Best,
Kathleen

 

[Rock2r]

Thanks for the prompt response Kathleen.

I believe I will pass on the Transplate then as I can't justify the price if it won't work for me in my situation for a one-time purchase.

Also pass on a Transpac as I already own the S/S plate and wing. Currently diving a Knighthawk and looking to move away from that arena.

 

[James R]

For reference, I had a XL nighthawk which fit me fine. Also, I wear a XL or XXL shirt, depending mostly on the neck/chest cut.

The XL straps on the dive rite rig are more than long enough for me. It's got quite a lot of strap to let out at first then take in as your size changes. I find it to be super comfortable, and with the crotch strap, very solid feeling in the water b/c it doesn't move around or ride up. I was considering the XXL as well, but that would be excessive for me and I'd end up with a lot of extra 2" webbing tucked back up.

 

[Rock2r]

For reference, I had a XL nighthawk which fit me fine. Also, I wear a XL or XXL shirt, depending mostly on the neck/chest cut.

The XL straps on the dive rite rig are more than long enough for me. It's got quite a lot of strap to let out at first then take in as your size changes. I find it to be super comfortable, and with the crotch strap, very solid feeling in the water b/c it doesn't move around or ride up. I was considering the XXL as well, but that would be excessive for me and I'd end up with a lot of extra 2" webbing tucked back up.

Very helpful info...thanks.

My Knighthawk is a Large with a cummerbun extension on it as the stock one was just a tad tight. Shoulderwise though, the K/Hawk "L" is fine. Then again, Scubapro BC's tend to run larger than the tag size across the board.

I was afraid that a Transplate in XXL would be too big or sloppy in the shoulders as you state. Out of the box, does an XL come close to a XXL with still some adjustment left?

 

[James R]

I'm not sure exactly of the strap length differences, but based on what I'm reading in your last reply an XL would probably be fine since you can wear a L Knighthawk. The waist band in the XL is quite long. I have a lot left over that is folded back or tucked away as I have not cut it yet, and may not.

If you haven't used a rig like this before, keep in mind that it does take a while to get it all adjusted just how you want. Everything is super adjustable, and because of that it can be a bit of work. However, this adjustment capability is a huge plus! Once you get it set up right diving in it is awesome.

Your LDS can show you how to adjust, move D-rings, etc. If you plan to adjust it on your own, I would definitely suggest you only do one side or strap at a time so that you can reference the other side easily in case you need help putting it all back together properly. I mean adjust the left shoulder strap and D-rings leaving the right alone. Compare them to ensure you routed the left back correctly before working on the right side, then reverse the process.