In many magazines I have subscribed to over time, they will have a user tips and tricks section where people share the small things they have learned over time. Scubaboard is filled with valuable information on nearly every topic in diving. I wanted to start a thread where people share the "little things" that have made a difference. It can be anything that makes a gear configuration easier, how to clean something easier or better, and alternate use of an item, those things you figured out or someone told you that make things easier. I enjoy reading through things like this and adapting ideas to my gear, my routines, and the way I dive.
So I will start with a small one and I hope others will add to the list. Many people probably end up with different lights, cameras, strobes, etc., really anything with O rings. When you buy something they almost always come with spare O rings. If you are like me you end up with gear tub instead of keeping all the boxes just to keep O rings separated. Cut a little piece of paper, write down what the O ring is for, then you can throw them all in one place. 2 years later when you need to replace an O ring you wont be scratching your head about which one goes on this light vs the other light.
So I will start with a small one and I hope others will add to the list. Many people probably end up with different lights, cameras, strobes, etc., really anything with O rings. When you buy something they almost always come with spare O rings. If you are like me you end up with gear tub instead of keeping all the boxes just to keep O rings separated. Cut a little piece of paper, write down what the O ring is for, then you can throw them all in one place. 2 years later when you need to replace an O ring you wont be scratching your head about which one goes on this light vs the other light.