Tank valve adapter / test block

[Scubaroo]

Does anyone know where to source a test valve block, for mounting a scuba valve on a benchtop for regulator testing and rebuilds? There's pictures of one in the Airspeed Press book on page 146, but I've been unable to find a source for these.

Peter Built (www.scubatools.com) does not have them, and GMC Scuba has them as part of complete test benches, but I could not find them listed individually for sale.

 

[FredT]

Old vis failed Scuba tank, cut off at the shoulder to make a tank stub.
Scuba valve, dip tube removed and that hole rethreaded to accept a tube fitting, usually 1/4"NPT in the states.

Weld a flat bar across the botom of the tank stub to mount it to the bench, or drill and tap the tank wall 3 places for screws to mount it to the bench from below. Run a tube from the bank to the valve through the bottom of the tan stub.

 

[COVCI]

Part number 48060.

Let me know if you want one if you don't already have an account with Global.

Chris
COVCI