- Messages
- 17,486
- Reaction score
- 9,720
- Location
- Somewhere between here and there
- # of dives
- 2500 - 4999
I have a project set I'm not going to get around to doing.
Non side port older model.
The face plates and securing rings have been re chromed. New stock OEM service kits for both second stages and first stage. New Exhaust Ts and exhaust valves. New second stage decals. The first stage is all 3/8 ports (3x LP/1x HP) so included is a new 3/8-7/16 adaptor for use with standard HP hose.
It's 100% complete just needs cleaning and assembly. I'll throw in a bent screwdriver and wrench for adjusting the second stage and a 1/2" dowel to facilitate first stage HP assembly. The second stage cases are in very good condition with no serious corrosion or dents etc. diaphragms seal fine, no holes, tears etc, before I disassembled them they held vacuum. I'll throw in a third complete second stage, I hooked it up to a tank and not surprisingly it works with no leaks but assume it needs servicing. The mouth pieces are OEM comfobites with two metal tang zip ties. The service manuals are very easy to find online but I can provide PDFs if needed.
I'd like $225 (OBO) plus $30 shipping, shipping will be around $60 but I'll pay half. Shipping will be by EMS with tracking. PayPal is preferred. Cheers.
Non side port older model.
The face plates and securing rings have been re chromed. New stock OEM service kits for both second stages and first stage. New Exhaust Ts and exhaust valves. New second stage decals. The first stage is all 3/8 ports (3x LP/1x HP) so included is a new 3/8-7/16 adaptor for use with standard HP hose.
It's 100% complete just needs cleaning and assembly. I'll throw in a bent screwdriver and wrench for adjusting the second stage and a 1/2" dowel to facilitate first stage HP assembly. The second stage cases are in very good condition with no serious corrosion or dents etc. diaphragms seal fine, no holes, tears etc, before I disassembled them they held vacuum. I'll throw in a third complete second stage, I hooked it up to a tank and not surprisingly it works with no leaks but assume it needs servicing. The mouth pieces are OEM comfobites with two metal tang zip ties. The service manuals are very easy to find online but I can provide PDFs if needed.
I'd like $225 (OBO) plus $30 shipping, shipping will be around $60 but I'll pay half. Shipping will be by EMS with tracking. PayPal is preferred. Cheers.
Last edited: