I am thinning my gear as I reduce my teaching load. I have a lot of extra gear and I am getting more into cycling. As a result I am going to keep only what I need for myself and since most of my diving 90% is sidemount and I have 6 rigs I don't need this one.
Manta Sidemount harness and wing. Designed for diving with heavy steel cylinders. Wing is rated for approximately 50lbs of lift. The way it is designed with the separations in the wing, it doesn't pillow as much as a wing that is just one big cell with heavy cylinders like say an XDeep Classic that I also have. Note the custom hardware on the shoulder straps and spine strap to attach the bungees. The way this rig is set up allows you to make a great number of adjustments on the harness. Not just for the shoulders and waist, but also the length between the back and waist plates. Retail is 449 for this. Asking 350.00 plus shipping
Manta Sidemount harness and wing. Designed for diving with heavy steel cylinders. Wing is rated for approximately 50lbs of lift. The way it is designed with the separations in the wing, it doesn't pillow as much as a wing that is just one big cell with heavy cylinders like say an XDeep Classic that I also have. Note the custom hardware on the shoulder straps and spine strap to attach the bungees. The way this rig is set up allows you to make a great number of adjustments on the harness. Not just for the shoulders and waist, but also the length between the back and waist plates. Retail is 449 for this. Asking 350.00 plus shipping