Seac action doesn't light up anymore

[Isa.nerwen]

Hiya all,

I have an issue with my Seac Action that doesn't light up in the dark anymore.
It used to be automatically activated during a dive when dark, and manually in surface pressing the HL button.

I tried to look in the manual and online, and to play around with the display settings but I can't figure out why it doesn't do it anymore.

Anyone that can help?
Thanks

 

[Sascha314]

Did you check in the options if accidentily the light is set to off?
Did you check the light is working, if you manually activate it?
Is the battery capacity ok?

If that is all fine, and mode set to automatic the light sensor needs to be checked, maybe dirty or so?

 

[Isa.nerwen]

Did you check in the options if accidentily the light is set to off?
Did you check the light is working, if you manually activate it?
Is the battery capacity ok?

If that is all fine, and mode set to automatic the light sensor needs to be checked, maybe dirty or so?

I haven't found how to check the light on the manual or online... It's the background light of the LED screen btw, not an external light.
I've been playing around with the settings but I can seem to find it, it doesn't work anymore whether it's manually activating it or while diving.

It's very new, I've had it for a couple of months so the battery should be ok.
I will bring it to be checked but I thought to ask here first!

 

[Sascha314]

Well I do not have the computer, but had a look at the manual

https://www.seacsub.com/wp-content/uploads/2021/02/ACTION_ACTIONHR_User_Manual_EN-1.pdf

Page 24
So you need to check the options, especially brightness level and bkl time.
Then you can test, if the light itself works with the bkl mode MAN.
Make sure the HL button works!

If that does not work, something is wrong and you should contact your dealer.
If that works, then make sure the serrings are according to your preferences and test again...

 

[Isa.nerwen]

Well I do not have the computer, but had a look at the manual

https://www.seacsub.com/wp-content/uploads/2021/02/ACTION_ACTIONHR_User_Manual_EN-1.pdf

Page 24
So you need to check the options, especially brightness level and bkl time.
Then you can test, if the light itself works with the bkl mode MAN.
Make sure the HL button works!

If that does not work, something is wrong and you should contact your dealer.
If that works, then make sure the serrings are according to your preferences and test again...

Oh, I did check that but I didn't think to check if it works in Manual mode.
It doesn't, so I think I need to bring it to a shop.
Thank you for your help!