wreckdiver4457
Contributor
I have for sell Sea & Sea MDX-D300, Sea & Sea Dome Port, Sea & Sea NX Port Extension Ring, 5-pin Dual Sync Cord, sea & sea ys-120, Ultralight Arms, Nikon D300, Toknia 10-17mm Lens with zoom ring and a tokina 28-70 f2.6-2.8. Also have few packs of new replacement o-rings.
Asking 3200 for everything plus shipping if paying with Paypal add 3.5%
Sea & Sea MDX-D300 INFO:
TTL converter connector employed as standard.
The included type-N 5-pin wired connector accepts the optional TTL converter III for Nikon. The converter works with the YS-Series strobes to provide automatic TTL flash adjustment.
The converter requires the Sync Cord/N for connecting to a strobe.
The MDX-D300 housing comes from the factory with these type-N connectors: one 2-pin wired connector and one 5-pin wired connector.
To use two SEA&SEA YS-Series strobes with the factory-equipped type-N connectors, you must use the Dual Sync Cord/N.
Main features of the MDX-D300 housing
Every detail of the housing is precision CNC machined. Ergonomically designed for ease of use.
Manufactured from solid block aluminum alloy with all edges carefully polished for safety.
The housing is protected by a highly corrosion resistant anodized (black) coating. The coating provides the housing from environmental corrosion and abrasions.
An optional TTL converter III for Nikon enables automatic TTL strobe photography.
Equipped with a 0.66x pick-up viewfinder standard. An interchangeable 0.8x viewfinder (optional) is also available.
Both the main command dial and sub command dial are operable while holding the hand grips due to advanced ergonomic design.
Most Nikon D300 camera functions are accessible and can be operated underwater with ease.
The quick shoe makes the camera easy to install and remove from the housing.
A port lock mechanism secures the port from accidental loosening.
Comes standard with two kinds of type-N connectors: one 2-pin wired connector (for manual) and one 5-pin wired connector (for dedicated TTL).
The locking latches prevent accidental housing opening.
A built-in leak sensor immediately alerts you to any water leakage.
[MDX-D300 Specifications]
Construction: Body: corrosion-resistant aluminum alloy (machined) / anodized body, Grip: corrosion-resistant die-cast aluminum alloy
Depth rating: 60m / 200ft
Dimensions (WxHxD): 330x163x136mm / 13.2x6.5x5.4inch
Weight: Approx. 2,500g / 87.5oz (Housing only
Asking 3200 for everything plus shipping if paying with Paypal add 3.5%
Sea & Sea MDX-D300 INFO:
TTL converter connector employed as standard.
The included type-N 5-pin wired connector accepts the optional TTL converter III for Nikon. The converter works with the YS-Series strobes to provide automatic TTL flash adjustment.
The converter requires the Sync Cord/N for connecting to a strobe.
The MDX-D300 housing comes from the factory with these type-N connectors: one 2-pin wired connector and one 5-pin wired connector.
To use two SEA&SEA YS-Series strobes with the factory-equipped type-N connectors, you must use the Dual Sync Cord/N.
Main features of the MDX-D300 housing
Every detail of the housing is precision CNC machined. Ergonomically designed for ease of use.
Manufactured from solid block aluminum alloy with all edges carefully polished for safety.
The housing is protected by a highly corrosion resistant anodized (black) coating. The coating provides the housing from environmental corrosion and abrasions.
An optional TTL converter III for Nikon enables automatic TTL strobe photography.
Equipped with a 0.66x pick-up viewfinder standard. An interchangeable 0.8x viewfinder (optional) is also available.
Both the main command dial and sub command dial are operable while holding the hand grips due to advanced ergonomic design.
Most Nikon D300 camera functions are accessible and can be operated underwater with ease.
The quick shoe makes the camera easy to install and remove from the housing.
A port lock mechanism secures the port from accidental loosening.
Comes standard with two kinds of type-N connectors: one 2-pin wired connector (for manual) and one 5-pin wired connector (for dedicated TTL).
The locking latches prevent accidental housing opening.
A built-in leak sensor immediately alerts you to any water leakage.
[MDX-D300 Specifications]
Construction: Body: corrosion-resistant aluminum alloy (machined) / anodized body, Grip: corrosion-resistant die-cast aluminum alloy
Depth rating: 60m / 200ft
Dimensions (WxHxD): 330x163x136mm / 13.2x6.5x5.4inch
Weight: Approx. 2,500g / 87.5oz (Housing only
