Scubapro R190

[Hawaii_Diver]

I have a Scubapro R190 hose that just split. Have several new hoses, but the connector is too small to connect to the regulator. Is there a connector adapter? Would be 3/8 at the end connecting to the hose and 1/2 to the end connecting to the regulator. Think this is correct. If not adapter where can I buy a hose other than a scuba shop?

 

[DMDavid]

Becareful that you don't cross-thread the hose, it can be as bad as cross-posting.


FB-Florida Scuba Diver

 

[redacted]

An R190 takes a standard hose, the same as most 2nd stages.

 

[DevonDiver]

I just replaced the hose on a R190 and it was standard. Do you have a pic showing the problem?

 

[halocline]

Is it a scubapro 1st stage or something else? Some older first stages had odd sized LP ports. The other thing is that if you're trying to use a non-scuba hose for this application, I have no idea what would or would not work, but since LP scuba hoses are a dime/dozen on ebay, I'd just go that route if you want to avoid a dive shop.

 

[dlamprou]

You need an adapter from 3/8 female to 1/2 male. I use one to connect my Mares BCD to a Dacor 1st stage with 1/2 LP ports.

 

[Couv]

You need an adapter from 3/8 female to 1/2 male. I use one to connect my Mares BCD to a Dacor 1st stage with 1/2 LP ports.

Adaptor 1/2 Male to 3/8 F [1/2 x 3/8 adaptor] - $5.00 : Vintage Double Hose!, Your online source for all things related to vintage diving