ScubaPro Mk20 Yoke 1st + G200B 2nd
1st stage just serviced (HP seat and o-rings replaced)
Yoke retainer recall done (parts replaced by a SP dealer)
IP settles at 145psi
brass piston
2nd stage is in working condition but is due for service
holds vacuum, no freeflow on surface, breathes smooth
~1" cracking pressure
~29" ScubaPro hose
$150
Can include a new Mk25 composite piston for $40.
Used, sold as is.
Disclaimer: Regs appear to be in good working condition but all used scuba gear should be inspected/serviced by a trained technician prior to use for your safety.
7151
1st stage just serviced (HP seat and o-rings replaced)
Yoke retainer recall done (parts replaced by a SP dealer)
IP settles at 145psi
brass piston
2nd stage is in working condition but is due for service
holds vacuum, no freeflow on surface, breathes smooth
~1" cracking pressure
~29" ScubaPro hose
$150
Can include a new Mk25 composite piston for $40.
Used, sold as is.
Disclaimer: Regs appear to be in good working condition but all used scuba gear should be inspected/serviced by a trained technician prior to use for your safety.
7151
Last edited:
