Scubapro light
- Thread starter odessa.dk
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
Goddag Odessa.dk,
Please tell me what this project entails. For instance, what are the stock parts in this light and what modifications and improvements have you made? Those Li-ion batteries look very small for that size light. Is that all that is powering them? Quite frankly, when it come to knowing all the business of drivers, bulbs, lumens, etc. I am lost, so be gentle.
Tak,
Couv
Please tell me what this project entails. For instance, what are the stock parts in this light and what modifications and improvements have you made? Those Li-ion batteries look very small for that size light. Is that all that is powering them? Quite frankly, when it come to knowing all the business of drivers, bulbs, lumens, etc. I am lost, so be gentle.
Tak,
Couv
Hi Couv
whooo all that info , go to this forum CandlePowerForums - Powered by vBulletin
and you will get all your help you need for business of drivers, bulbs, lumens, etc
and where to buy
sorry i dont write so good englisk
whooo all that info , go to this forum CandlePowerForums - Powered by vBulletin
and you will get all your help you need for business of drivers, bulbs, lumens, etc
and where to buy
sorry i dont write so good englisk
Last edited:
BSea
Contributor
How long does the light last? I would think a P7 would drain those batteries fast.
There is 2 P7 you can buy 1 is 3,75v 2800mah 9W, an 1 is 3,5v 2800mah 9W
Li ion is 3,7v 2200mah so i have them some 1p1 that is ( 4,02v 4400mah fuld load )
I will test it out soon to see how long time i have i need water to cool it down
Li ion is 3,7v 2200mah so i have them some 1p1 that is ( 4,02v 4400mah fuld load )
I will test it out soon to see how long time i have i need water to cool it down
drive: PowerLine SLIM Constant Current Power Supply (2800mA, 30V)
i am using a old reflector : DealExtreme: $3.24 26.5mm Smooth Aluminum Drop-in Module Set (without Emitter)
but you can buy reflector to P7 now
I will use 7,4v 4400 mah to do the test
Rember you need a (Big Good Cooler to a P7 ) the one i use is home made
i am using a old reflector : DealExtreme: $3.24 26.5mm Smooth Aluminum Drop-in Module Set (without Emitter)
but you can buy reflector to P7 now
I will use 7,4v 4400 mah to do the test
Rember you need a (Big Good Cooler to a P7 ) the one i use is home made
Similar threads
