Greg 376
Registered
My son somehow lost the LP inflator hose for his size Medium Scubapro Level BCD. Does anyone know the correct length it’s supposed to be ?I don’t want to order the wrong size.
Scubapro Level BCD LP Hose
- Thread starter Greg 376
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
80-100cm is good, depends on tank placement/comfort
- Messages
- 7,195
- Reaction score
- 6,240
- # of dives
- 2500 - 4999
Hey mate where are you going with your hose fire fighting or drysuit filling
Put the gear on the kid follow the run with an octo hose and then measure
Put the gear on the kid follow the run with an octo hose and then measure
halocline
Contributor
That is far longer than any LP inflator hose I would ever use. The way to determine the best length is to mount the BC and reg on a tank in the position you intend to dive, then simply measure from the 1st stage to fitting on the inflator. Get one that length. For me it’s between 18 and 21 inches, so 45-55 cm.
Come to think of it I was recalling the wrong thing completely, you’re right — mine is 60cm, and it did have some slack
My bad
I haven’t put on a back wing/jacket in a couple years now — just SM wings; out of site out of mindShould’ve just measured the one I have for IP testing
Similar threads
