Scubapro Aladin Sport Battery Replacement O-ring

[sdavo]

What size is the battery compartment o-ring for a Scubapro Aladin Sport? Is there a special procedure for this battery replacement, or is it just a straightforward battery swap and o-ring replacement?

 

[berkleegrad]

Not sure this is helpful; but, I have an old '90s Aldin Pro which is oil filled and battery i think is soldered ... last month, I used Terrence Brady up in Ocala FL to change the battery - cost about $50 I can dig up his email if you are interested...

He is also on eBay...

Battery Change Uwatec Aladin Pro Nitrox Smartcom Air Z US Diver Monitor Legend | eBay

Hope this helps, -Rick

 

[runsongas]

should be the same 024 as the tec 2g. use a nickel to open the battery hatch. make sure to align the circles correctly after you install the new battery.

procedure is on pg 47 of the owners manual

 

[sdavo]

Thanks for the replies.

@berkleegrad It's the newer style that's not oil filled and just has a watch battery in it, luckily.

@runsongas Good call, I should have checked the owner's manual before posting.

 

[DIVEWATCHDOCTOR]

It takes a B-024 O-ring.