iskoobedoo
New
- Messages
- 2
- Reaction score
- 0
Hi! I'm planning to buy a UK SL6 and modify its lens into a dome-type housing. Can someone please take apart his SL6 and measure the thickness and diameter, as accurate as you can. Thanks in advance!
request for UK SL6 lens measurement
- Thread starter iskoobedoo
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
Rev. Blade
Contributor
The UK website gives external specs. http://www.ukinternational.com/products/detail.php?ProductID=8 What measurement did you want? The bulb and relector assembly of my SL4 is 1 11/32" across.
OP
iskoobedoo
New
- Messages
- 2
- Reaction score
- 0
Thanks Rev Blade.
I've been to the UK website, but the measurements I needed were not given. Sorry I was not so accurate in my request. I needed the thickness and diameter of the lens, as well as the dimensions of the battery cavity. Again thanks.
I've been to the UK website, but the measurements I needed were not given. Sorry I was not so accurate in my request. I needed the thickness and diameter of the lens, as well as the dimensions of the battery cavity. Again thanks.
Similar threads
