tedgarner
Contributor
I have a pressure gauge (mares).I have no boot for it,my question is
could I get a hose and make it a back up?
could I get a hose and make it a back up?
pressure gauge
- Thread starter tedgarner
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
PeterNBiddle
Contributor
Yep. You can also find boots for cheap on eBay.
clownfishsydney
Contributor
You do not need a boot, I have not had a boot on my pressure gauge for 10 years.
- Messages
- 17,541
- Reaction score
- 9,785
- Location
- Somewhere between here and there
- # of dives
- 2500 - 4999
Is yours plastic?
OP
tedgarner
Contributor
Yes it is plastic
Scared Silly
Contributor
Not sure how you will be using it:
If plastic and if not on a stage/deco/pony I would find a boot for it just to give it a bit of protection. If brass and glass, as is, is fine.
Now if a back up that is going be left in your save a dive kit - then no boot is needed.
Also you may not even need a hose. Computer HP hose and easily be used by removing the computer or quick disconnect.
If plastic and if not on a stage/deco/pony I would find a boot for it just to give it a bit of protection. If brass and glass, as is, is fine.
Now if a back up that is going be left in your save a dive kit - then no boot is needed.
Also you may not even need a hose. Computer HP hose and easily be used by removing the computer or quick disconnect.
beanojones
Contributor
- Messages
- 3,204
- Reaction score
- 349
Actually in the way that Brass and Glass can be used without a boot, so can plastic face with metal back gauges. mostly.
It's the back that matters whether it is plastic or not. The recent Mares stuff is all metal back, and plastic face in the slim gauge and glass face in the bigger gauge style.
Edit: Probably best to post a picture of the gauge.
It's the back that matters whether it is plastic or not. The recent Mares stuff is all metal back, and plastic face in the slim gauge and glass face in the bigger gauge style.
Edit: Probably best to post a picture of the gauge.
Last edited:
PeterNBiddle
Contributor
I booted my B&G Hog SPG. YMMV
Similar threads
