Hi
I need some advice from someone who can advise how I adjust the Intermediate pressure of a cyclone.
I am obviously not a certified tech for poseidon but I have successfully serviced and repaired 50 or so regs of other brands. I am from the UK but working in Costa Rica where there are no poseidon specialitst. I am confident in the abilities of myself and the wealth of knowledge around me to do this as long as i have some guidance, hence the post.
The issue is that my intermediate pressure is running at around 190psi I understand that they should be 165-175 but function well at lower psi eg 150. This is causing an issue with my alternative air source as when the 2nd stage is fully pressurised it causes the reg to spit a burst of air, not good if your swapping regs underwater.
I need to reduce the intermediate pressure, any clues?
Cheers
Drew
I need some advice from someone who can advise how I adjust the Intermediate pressure of a cyclone.
I am obviously not a certified tech for poseidon but I have successfully serviced and repaired 50 or so regs of other brands. I am from the UK but working in Costa Rica where there are no poseidon specialitst. I am confident in the abilities of myself and the wealth of knowledge around me to do this as long as i have some guidance, hence the post.
The issue is that my intermediate pressure is running at around 190psi I understand that they should be 165-175 but function well at lower psi eg 150. This is causing an issue with my alternative air source as when the 2nd stage is fully pressurised it causes the reg to spit a burst of air, not good if your swapping regs underwater.
I need to reduce the intermediate pressure, any clues?
Cheers
Drew
