redrover31
Contributor
- Messages
- 78
- Reaction score
- 7
Hello
When setting the 123psi IP on a 3960, is it done at a full tank (3-3500psi) or a empty tank (500psi)
If it set 123 at 800 psi, I'm at 112psi at 3000psi on my reg.
When adjusting the Jetstream second, is it done at the low end (112psi) or high end (123psi). Normally I would adjust at the highest IP the second stage sees with a downstream second, but with this design is it reversed?
Thanks in advance
When setting the 123psi IP on a 3960, is it done at a full tank (3-3500psi) or a empty tank (500psi)
If it set 123 at 800 psi, I'm at 112psi at 3000psi on my reg.
When adjusting the Jetstream second, is it done at the low end (112psi) or high end (123psi). Normally I would adjust at the highest IP the second stage sees with a downstream second, but with this design is it reversed?
Thanks in advance