Externet
Contributor
Hi all
My daughter will take over my baby compressor, and would like very precise wording in the use instructions. It will be well explained but would like to print a reminder onto the unit.
Correct, suggest, edit for foolproof safe operation. Thank you.
==================================================
- Scuba compressor operation -
Check oil level is correct.
1.- Attach filler adapter hose to tank with its pressure release knob counterclockwise open.
2.- Plug to 120VAC wall outlet and turn switch to on.
3.- Motor will start running and compressor output will be venting purging moisture and oil from separator. A red pilot light will be on to tell it is purging air.
4.- When purging ends 14 seconds after starting, the pilot light will become green to tell it is compressing air. Close the pressure release knob on the filling adapter clockwise and open the tank valve counterclockwise to admit compressed air into the tank.
5.- Watch the pressure gauge rise, when the preset pressure is reached, compressor should shut-off and purge condensate automatically or, shut off switch manually when desired pressure is reached, purge will then take effect.
6.- Close the tank valve and next open the filling adapter pressure release counterclockwise to vent the hose.
7.- Remove filling attachment hose from tank by turning counterclockwise.
8.- Cap filling hose end, unplug from wall outlet.
====================================================
(It has a 14 seconds automatic timer to purge after turned on and also purges when turned off)
My daughter will take over my baby compressor, and would like very precise wording in the use instructions. It will be well explained but would like to print a reminder onto the unit.
Correct, suggest, edit for foolproof safe operation. Thank you.
==================================================
- Scuba compressor operation -
Check oil level is correct.
1.- Attach filler adapter hose to tank with its pressure release knob counterclockwise open.
2.- Plug to 120VAC wall outlet and turn switch to on.
3.- Motor will start running and compressor output will be venting purging moisture and oil from separator. A red pilot light will be on to tell it is purging air.
4.- When purging ends 14 seconds after starting, the pilot light will become green to tell it is compressing air. Close the pressure release knob on the filling adapter clockwise and open the tank valve counterclockwise to admit compressed air into the tank.
5.- Watch the pressure gauge rise, when the preset pressure is reached, compressor should shut-off and purge condensate automatically or, shut off switch manually when desired pressure is reached, purge will then take effect.
6.- Close the tank valve and next open the filling adapter pressure release counterclockwise to vent the hose.
7.- Remove filling attachment hose from tank by turning counterclockwise.
8.- Cap filling hose end, unplug from wall outlet.
====================================================
(It has a 14 seconds automatic timer to purge after turned on and also purges when turned off)
