Peregrine charging

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

cuter81

Registered
Messages
8
Reaction score
3
Location
colorado
# of dives
200 - 499
Have people had trouble with the Peregrine holding a charge?
 
Have people had trouble with the Peregrine holding a charge?
No. I’ve had zero issues with mine. I’m not aware of any Teric-like issues with the Peregrine. The Peregrine is a much larger form factor than the Teric. I’d image it has a very different battery.
 
I have two, and they both seem good for holding a charge. The second I've only had for a month or so, but it's still at 3.97 volts after mostly idling for that month.
 
Have people had trouble with the Peregrine holding a charge?
We have 2 in our household and no problems at all. My wife and I have Geo 2s for backup and it’s so much nicer to be able to recharge the unit instead of replacing the battery. As @Divin'Papaw said, the Teric is a different animal. Also, the Peregrine has been around long enough that it would be all over this board if there were any issues.

Erik
 
I charged mine around the 20th of November for a week long LoB. I did 18 dives in the LoB and another 3 dives since then. 2 months and 21 dives later (all about 1 hour long) my Peregrine's battery now reports 3.81V and the battery bar seems to be around ~2/3 full.
 
Two different Peregrines (wife's and daughter's) - 11 dives, each an hour long over 5 days, 1 hour SI between most, and battery was still 1/2 power.
 
I have had mine for about two years. It gets charged up between outings without a problem. Holds the charge for months without issue. I use a cheap desk light with a built induction charger. I save the USB charging plate that came with it for traveling.

There was someone about a year ago who was having a problem holding a charge on his. The general consensus was it needed service. You might look up that thread and see what was said. I am very pleased with mine.
 
Just the opposite. The charge needs of mine are remarkable.
 
https://www.shearwater.com/products/peregrine/

Back
Top Bottom