Palm O2 Sensor failed that quick?

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Thunder Struck

Contributor
Scuba Instructor
Divemaster
Messages
794
Reaction score
1,532
Location
Sippin' cholla juice under the shade of a mesquite
So before taking off to Fiji I tested my less than a year-and-a-half Palm O2 analyzer (factory tested on April 24. 24, purchaed from on May 4, 24) on a 33% bottle at the house. Calibrated and read just fine. I get here to Fiji a few days later, now it only goes up to about 6.- or 7. - something, sometimes as high as 9, but that’s it.

Try to do a calibration and it reports “Err”. Change the batteries, same thing. No signs of damage or leaking to the cell. Unit had never seen much use, perhaps. Dozen or so cylinders analyzed I. The last year. With the cell being a little over a year and 3 months old, it seems like it should have plenty of life left.

It’s possible the power got turned on to it somehow and it stayed on for some time, but my understanding is that the sensor just huma along outputting its value regardless if the unit itself is on or off. Or is that not the case?

Unit lives in a little nylon case, not thrown off the boat or such. I’m pretty sure it was in my carryon bag, but if it was checked all my gear was in a Pelican 1615 so it was well protected. Can’t say for certain as once I started to unpack it was a flury of unpacking and sorting.

Of course warranty ran up after a year.
 
It’s possible the power got turned on to it somehow and it stayed on for some time
Power on wouldn't have impacted the cell, they are essentially like a battery themselves. Some cells just die early. (I had one crap out after 6 months.) Replacement should run $80-$100.
 
Power on wouldn't have impacted the cell, they are essentially like a battery themselves. Some cells just die early. (I had one crap out after 6 months.) Replacement should run $80-$100.
Thanks. I’m hoping that’s all this is. Don’t want to buy a new sensor when it’s something else.

Just strange how it went from hunky-dory reading 33% to less than 10. And in the time originally posted this I had the sensor and batteries out, it’s now barely reading 4%.
 
I think the Palm O2 Analyzer is great when it works but I’m finding it’s a bit unreliable.

I’d get the Divesoft DNA pill but I don’t want to have to connect to my phone to see the results.

Probably going to spring for the Nuvair O2 QuickStick.
 

Back
Top Bottom