Old Style XT Fins - Need Screw to fit pin

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

tomcatbubba

Trimix Instructor | Master Instructor
ScubaBoard Supporter
Scuba Instructor
Divemaster
Messages
275
Reaction score
181
Location
Southern Maryland
# of dives
2500 - 4999
Hi Dive Rite, I have a pair of the 1st generation XT fins that had the spring held via a long pin with female threads, a small machine screw then screwed into the threads to hold the assembly together. Unfortunately I lost a screw, do you know the specs so I can get a replacement? My local hardware store does not stock them that small so I might need to order a few.

I posted here in case someone else has the same problem.

Thanks,
Jon V
 
By posting here I'm hoping to help other divers who may be in need of the screw to get them back in the water. Calling kind of defeats the purpose of spreading the knowledge......
 
you can post after getting a response, but if you don't contact DR directly, the chances are not good you will get a response through this forum
 

Back
Top Bottom