I bought a scubapro Mk25 G250. But still planning to put an Octo to it. I have been using a Calypso6 second stage as my octo for my SE2. Can I also use this to my MK25 g250. So I won't have to spend money for another octo and buy a new set of fins instead.Is it possible? I'm just planning to make my SE2 as my spare reg during long dive trips. :dazzler1:
octo for mk25 g250
- Thread starter gaudencio
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
The Calypso 6 second stage will do fine as an octo paired with a Mk 25. Both USD and SP regs use the same basic IP range of 125-145 psi (as doesnearly every one else). Worst case you will need to get the second stage retuned to the Mk 25 first stage if the IP's were significantly different. This is a good idea anyway and should take a tech less than 5 minutes.
Similar threads
