Up for sale is an Oceanic Probe BCD with an XS backup regulator/inflator. This is a great BCD and has only been used on 1 dive. It looks and pretty much is brand new.
I have attached 2 pictures and can send more if needed. I am asking $400 for it. I live in Atlanta, so meeting somewhere for local pickup would be free, otherwise $20 should cover shipping to the continental US.
Below is a description from LeisurePro's website:
Our equipment should enhance, not hinder the joy and exhilaration of scuba diving. Nowhere is this more important than with BC's, where comfort and freedom of movement must be balanced against function and durability. Responding to this challenge led Oceanic design engineers to create BioFlex - a unique "living fabric" that stretches flexes and conforms to the body. BioFlex is an extraordinary fabric, which stretches, fully inflated up to 30% over conventional nylon or polyurethane BC materials, the idea being that if a material could stretch while remaining airtight, you could make smaller air cells, creating less bulk and drag underwater while achieving high volumes of lift when required. BioFlex eliminates chest squeeze, conforms to the diver's body and provides a slim, body hugging profile. Oceanic's patented QLR Quick Lock & Release System is standard equipment on the Probe LX.
Your weights stay inposition throughout the dive and do not shift around affecting buoyancy or position in the water. The weight pouches are simple to load and easy to release. Located on the back of the BC on either side of the tank cradle, two Rear Trim Weight Pockets provides greater integrated weight capacity and better attitude underwater, pockets carries up to 10 non-dump-able pounds. Exterior abrasion points of the Probe LX are covered in our new "Fadeless" 1600-denier ballistic nylon - tough stuff that will hold up to years of extreme diving and keep that "new look" longer. Pre-Bent Stainless Steel D-rings Welded and slightly bent for easy, one-handed attachment. Ergonomically designed to be functional and easy to use in any dive position, the Alliance Integrated Inflator provides a full range of airway exhaust/inflation control. Simply press a button to produce precise flow for trimming dive attitude or maximum flow for major changes in buoyancy. A large exhaust valve creates a flow rate higher than the inflation rate of the power inflator, improving diver control during ascents.
I have attached 2 pictures and can send more if needed. I am asking $400 for it. I live in Atlanta, so meeting somewhere for local pickup would be free, otherwise $20 should cover shipping to the continental US.
Below is a description from LeisurePro's website:
Our equipment should enhance, not hinder the joy and exhilaration of scuba diving. Nowhere is this more important than with BC's, where comfort and freedom of movement must be balanced against function and durability. Responding to this challenge led Oceanic design engineers to create BioFlex - a unique "living fabric" that stretches flexes and conforms to the body. BioFlex is an extraordinary fabric, which stretches, fully inflated up to 30% over conventional nylon or polyurethane BC materials, the idea being that if a material could stretch while remaining airtight, you could make smaller air cells, creating less bulk and drag underwater while achieving high volumes of lift when required. BioFlex eliminates chest squeeze, conforms to the diver's body and provides a slim, body hugging profile. Oceanic's patented QLR Quick Lock & Release System is standard equipment on the Probe LX.
Your weights stay inposition throughout the dive and do not shift around affecting buoyancy or position in the water. The weight pouches are simple to load and easy to release. Located on the back of the BC on either side of the tank cradle, two Rear Trim Weight Pockets provides greater integrated weight capacity and better attitude underwater, pockets carries up to 10 non-dump-able pounds. Exterior abrasion points of the Probe LX are covered in our new "Fadeless" 1600-denier ballistic nylon - tough stuff that will hold up to years of extreme diving and keep that "new look" longer. Pre-Bent Stainless Steel D-rings Welded and slightly bent for easy, one-handed attachment. Ergonomically designed to be functional and easy to use in any dive position, the Alliance Integrated Inflator provides a full range of airway exhaust/inflation control. Simply press a button to produce precise flow for trimming dive attitude or maximum flow for major changes in buoyancy. A large exhaust valve creates a flow rate higher than the inflation rate of the power inflator, improving diver control during ascents.
