Need some help with specs on these doubles

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Cyborg Pirate

Contributor
Messages
307
Reaction score
114
Location
Phoenix
# of dives
1000 - 2499
Normally I can figure out the information stamped on tanks. This set of Doubles has got me.

Faber steel

M8303 )4/2016/108
TC-3AAM-244/DOT-3AA 3180 REE 78 Initial hydro 09/04 +

I believe them to be Faber 120's

3180 psi is 108CF with + makes then 120CF @ 3498 psi

7.25 dia 28.5" tall not measuring valve with my measurements

Can anyone confirm this for me?
 
BTW, I own a set of galvanized Faber HP120's as you see in my avatar. However they are almost an inch taller, 3442 psi, and weigh almost 20# lighter (as twinsets, not individual tanks)
 
It's there between the Heiser and PST 120s.
yes this I believe this to be the set I am identifying. The chart doesn't show my Known Faber HP120's 3442 psi. That is why I was confirming that maybe there is not another tank that may not be listed. Did not want to jump to conclusion identifying these tanks.
 
https://www.shearwater.com/products/peregrine/

Back
Top Bottom