need help w oxycheq inflator hose

[g1223]

I use an oxycheq bc for spearfishing ,because I love how streamline it is. With that in mind, I would really like to do away with my octo, and was wondering if any knows if its possible to connect an air 2 source to it. I dont see them available on the site, but am wondering if there are universal air 2's that might work.I have the single tank wing. Thanks for the help

 

[mangrovejack]

It should fit, provided the corrugated hose is 1" in diameter (which is what the ScubaPro AIR 2 uses). I'm pretty sure that it is (had a Oxycheq wing about a year ago). You will probably need a longer hose though as the wing manufacturers usually don't expect you to use the hose for a combined octo/inflator. You will also need to replace the existing inflator hose (the low pressure hose) with the one that comes with the AIR 2.

 

[redacted]

The corrugated hose is the correct diameter. But you may want one a bit longer to reduce head movement restriction using the air2. You may also want to consider converting the elbow to a pull dump. It is pretty standard connections so compatible with many other smaller manufacturers including dive rite.

 

[Rynomar]

You might want to take a look at dive rite express (www.diveriteexpress.com). They have a lot of inflator accessories including pull dumps and an Rite Source inflator/octo.

Good luck.