Im a hull diver. When I turn upside down and spider crawl my reg is taking on water. Ive tried to service like a regular scuba reg but it's nit working. Any suggestions?
My SSA regulator is taking on water.
- Thread starter Sub Aqua Ventures
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
Namreg 58
Contributor
Look for a split in silicone mouth piece or crap on exhaust valve.
GJC
Contributor
What second stage are you using? Did it breath dry while upside down before?
A lot of them breath a little wet when upside down. You may need to think about a side exhaust like a Hollis 500 or Poseiden, or maybe a full face mask if you are in dirty, oily water.
A lot of them breath a little wet when upside down. You may need to think about a side exhaust like a Hollis 500 or Poseiden, or maybe a full face mask if you are in dirty, oily water.
Similar threads
