Miflex Hose Length For Bungeed Octo

[Wayward Son]

If you're using these hoses for an octo bungeed on your neck, what length are you using? Is the 22" long enough?

 

[John_B]

Yes, if anything I thought it might just border on too long for a single tank rig.

The lengths for Miflex hoses from XS Scuba (the importer) are predefined, your options are 22" and then 26" and longer so if 22" isn't going to work for you then you don't really have other options except a traditional LP hose.

The one Miflex hose I'm happiest with is my 18" inflator hose, its perfect with the short corrugated hose on my single tank wing.

 

[Wayward Son]

thanks, my current (regular type) hose is 26 & longer than needed.

 

[RJP]

Yup, 22" is perfect. I use 22" for both singles and doubles rigs with no problem.

 

[XS Scuba]

FYI:
We stock Miflex regulator hoses in a 24" length also. All available models can be viewed here: XS Scuba Miflex Double Braided Hoses

The lengths for Miflex hoses from XS Scuba (the importer) are predefined, your options are 22" and then 26" and longer so if 22" isn't going to work for you then you don't really have other options except a traditional LP hose.

 

[Jimmer]

22" was perfect for my single tank, and 26" was the most comfortable fit for my doubles rig, with my first stages at 90 degrees, and the hoses going straight down.

 

[Wayward Son]

I'm setting up a new reg (singles). Think I'll get a 22". I can always change it if needed.