DUI TLS350 Premium Drysuit
Stock size XL
Used
$1,100 + shipping
The new price, with all these accessories, is probably close to $4,000
Includes the following:
- TLS350 Premium drysuit
- TurboBoots, attached (I wear size 12 shoes)
- Drysuit inflation hose
- Halcyon balanced pee valve
- Quick disconnect hardware for condom catheters (3 sets)
- 38 Wide-Band condom catheters (medium)
- Halcyon thigh pockets (2 attached)
- Thinsulate booties (XL)
- Drysuit drying hanger
- 2 sets of spare wrist gaskets
- Gasket repair kit & glue
- Drysuit storage bag
I bought the drysuit from a GUE instructor who owned a dive shop in south Florida. When I bought the suit, he moved the shoulder valve back to a more optimal position. This position makes it easier to manage the air bubble in the drysuit, it takes just a little shoulder shrug to dump air. The original position is further forward, and it takes more of a contortion and roll to dump air from the valve.
There are a couple of wear points, one on each Turbo Boot. I reinforced one wear point with some AquaSeal glue.
During a liveaboard trip, the staff of the dive boat punctured the neck gasket when they were hanging up my drysuit. I replaced the neck gasket and both wrist gaskets, but I haven't taken the drysuit diving since then to check the seals.
I will include a gasket repair kit that includes two extra sets of wrist gaskets, three tubes of gasket glue, and non-stick poly board.
I can include the 38 condom catheters, if you want them.
I am also selling the Turtle Fins that I used with this drysuit:
Stock size XL
Used
$1,100 + shipping
The new price, with all these accessories, is probably close to $4,000
Includes the following:
- TLS350 Premium drysuit
- TurboBoots, attached (I wear size 12 shoes)
- Drysuit inflation hose
- Halcyon balanced pee valve
- Quick disconnect hardware for condom catheters (3 sets)
- 38 Wide-Band condom catheters (medium)
- Halcyon thigh pockets (2 attached)
- Thinsulate booties (XL)
- Drysuit drying hanger
- 2 sets of spare wrist gaskets
- Gasket repair kit & glue
- Drysuit storage bag
I bought the drysuit from a GUE instructor who owned a dive shop in south Florida. When I bought the suit, he moved the shoulder valve back to a more optimal position. This position makes it easier to manage the air bubble in the drysuit, it takes just a little shoulder shrug to dump air. The original position is further forward, and it takes more of a contortion and roll to dump air from the valve.
There are a couple of wear points, one on each Turbo Boot. I reinforced one wear point with some AquaSeal glue.
During a liveaboard trip, the staff of the dive boat punctured the neck gasket when they were hanging up my drysuit. I replaced the neck gasket and both wrist gaskets, but I haven't taken the drysuit diving since then to check the seals.
I will include a gasket repair kit that includes two extra sets of wrist gaskets, three tubes of gasket glue, and non-stick poly board.
I can include the 38 condom catheters, if you want them.
I am also selling the Turtle Fins that I used with this drysuit:
For Sale - Turtle Fins w/ Halcyon Spring Heels
Turtle Fins Halcyon spring heels (11 inch) Used Anyone know how to determine the size? I don't see an obvious size marking. Used with a DUI TLS350 w/ size 12 Turbo sole $120 shipped anywhere in the continental USA
scubaboard.com