Ever since taking @rsingler's regulator class, every now and then I've been buying a regulator on local ebay for cheap to work on it. By now my drawer is full of unused regulators and it's time to get rid of some of them. I figured it would be nice to first offer them here before I put them up back on the local ebay.
First one up: Mares MR22 (INT/yoke version) paired with Abyss second stage. If you'd like to read up on the history of these regulators, I recommend @lowwall's thread here: Guide to Mares regulators from 2000-2020. This one is manufactured some time between 1996-1998. All scuffed up on the outside, but clean on the inside.
Selling for 100CHF (100EUR, 125USD), bank transfer or paypal (or Twint, if you're in CH). Shipping to anywhere from Switzerland or from Germany (EU), shipping costs to be figured out.
The primary LP port on the first stage is a 1/2" DFC port, not the standard 3/8", but I'm including a 1/2"-3/8" adapter and I've installed a standard ScubaPro 3/8" hose on it. I'm throwing in a spare DIN insert in case you want to use this regulator with a DIN tank.
The regulator has been serviced by me with an original Mares service kit, plus a new diaphragm and new springs for the HP side. I'll include testing results sheet with the reg.
I've paid 20CHF for the reg, 70CHF for the service kit/parts, a spare hose from the drawer; 100CHF seems fair, I'm not trying to make a profit, just cover my costs.
Note: I'm not a professional and not affiliated with a dive shop. You assume certain risks if you buy. Even a serviced regulator may fail and your training should have prepared you for it. If you don't trust me, have someone else perform checks on it.
First one up: Mares MR22 (INT/yoke version) paired with Abyss second stage. If you'd like to read up on the history of these regulators, I recommend @lowwall's thread here: Guide to Mares regulators from 2000-2020. This one is manufactured some time between 1996-1998. All scuffed up on the outside, but clean on the inside.
Selling for 100CHF (100EUR, 125USD), bank transfer or paypal (or Twint, if you're in CH). Shipping to anywhere from Switzerland or from Germany (EU), shipping costs to be figured out.
The primary LP port on the first stage is a 1/2" DFC port, not the standard 3/8", but I'm including a 1/2"-3/8" adapter and I've installed a standard ScubaPro 3/8" hose on it. I'm throwing in a spare DIN insert in case you want to use this regulator with a DIN tank.
The regulator has been serviced by me with an original Mares service kit, plus a new diaphragm and new springs for the HP side. I'll include testing results sheet with the reg.
I've paid 20CHF for the reg, 70CHF for the service kit/parts, a spare hose from the drawer; 100CHF seems fair, I'm not trying to make a profit, just cover my costs.
Note: I'm not a professional and not affiliated with a dive shop. You assume certain risks if you buy. Even a serviced regulator may fail and your training should have prepared you for it. If you don't trust me, have someone else perform checks on it.
