jetfixrguy
Contributor
If you remove the isolator and split a set of doubles into singles, what plug would you use to plug the sides were the isolator was? Does dive rite make this plug?
manifold question
- Thread starter jetfixrguy
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
Yes, you can get the plugs from Dive Rite for a Dive Rite manifold (and clones). You'll need a left and a right as they are threaded with left and right hand threads like the manifold.
CE had them in stock last time I dropped in.
CE had them in stock last time I dropped in.
OP
jetfixrguy
Contributor
Great thanks for the quick reply!
Yes, my husband has also used these DR plugs, now that he has separated his doubles and is diving them sidemounted.
Dive Rite
Contributor
Hi,
VA2506R and VA2506L are the part numbers for the right and left valve plug. MSRP $10 each.
Best,
Kathleen
vicp
Contributor
Do these plugs fit the "older" previous generation DR valves/manifolds (shorter knobs - made in Italy)?
If not, where can you get those?
If not, where can you get those?
metaldector
Contributor
I did this with a ScubaPro manifold and they required a special plug. Plugs are not universal.
Similar threads
