Mako Compressor model #BAM06
Blast Containment Unit model #SSCFS3
used only 80 hrs. shop closed, asking $15,000 EXCELLENT CONDITION
Compressor Information - BAM06 3 phase
Model BAM06
Series MAKO
Description Breathing Air
Gas Compressed Air
Charging Rate (0 - max. pressure) (m3 per min) 0.372
Max or Rated Operating Pressure (Bar g) 350
Motor Output (kW) 7.5
Noise Level (db) 72
Length (mm) 794
Width (mm) 1067
Height (mm) 1670
Weight (Kg) 526
Speed (rpm) 1340
Cooling System air cooled
350
Charging Rate (0 - max. pressure) (m3/min):
0.372
Speed (rpm):
....................................................
Containment Fill Station
The Ultimate in Safety and Convenience
MAKOs containment fill stations offer the ultimate in safety and convenience. An enclosed steel chamber offers maximum protection in the event of a catastrophic cylinder failure. Our loading heights are ergonomically designed to reduce operator fatigue.
SCFS3 Standard Features
Stainless steel operations panels
Easy access panels for maintenance
Low loading heights for reduced operator strain
Cascade controls with dual valves per bank
Auxiliary outlet
Regulator with inlet and outlet pressure gauges
Air storage bypass valve
Certified to contain a rupture of an 80 cubic foot cylinder pressurized to 5000 psi*
MAKO has successfully designed and tested a new containment fill station capable of housing larger SCUBA cylinders. The SSCFS3, stationary scuba containment fill station, is designed with the same features as the SCFS3 with the following improvements:
SSCFS3 Standard Features
Houses up to (3) 120cf SCUBA cylinders with boots at one time
Removable SCBA bucket inserts are standard
Available with SCBA, SCUBA Yokes or DIN Adapters
* Contact factory for test certificates
Blast Containment Unit model #SSCFS3
used only 80 hrs. shop closed, asking $15,000 EXCELLENT CONDITION
Compressor Information - BAM06 3 phase
Model BAM06
Series MAKO
Description Breathing Air
Gas Compressed Air
Charging Rate (0 - max. pressure) (m3 per min) 0.372
Max or Rated Operating Pressure (Bar g) 350
Motor Output (kW) 7.5
Noise Level (db) 72
Length (mm) 794
Width (mm) 1067
Height (mm) 1670
Weight (Kg) 526
Speed (rpm) 1340
Cooling System air cooled
350
Charging Rate (0 - max. pressure) (m3/min):
0.372
Speed (rpm):
....................................................
Containment Fill Station
The Ultimate in Safety and Convenience
MAKOs containment fill stations offer the ultimate in safety and convenience. An enclosed steel chamber offers maximum protection in the event of a catastrophic cylinder failure. Our loading heights are ergonomically designed to reduce operator fatigue.
SCFS3 Standard Features
Stainless steel operations panels
Easy access panels for maintenance
Low loading heights for reduced operator strain
Cascade controls with dual valves per bank
Auxiliary outlet
Regulator with inlet and outlet pressure gauges
Air storage bypass valve
Certified to contain a rupture of an 80 cubic foot cylinder pressurized to 5000 psi*
MAKO has successfully designed and tested a new containment fill station capable of housing larger SCUBA cylinders. The SSCFS3, stationary scuba containment fill station, is designed with the same features as the SCFS3 with the following improvements:
SSCFS3 Standard Features
Houses up to (3) 120cf SCUBA cylinders with boots at one time
Removable SCBA bucket inserts are standard
Available with SCBA, SCUBA Yokes or DIN Adapters
* Contact factory for test certificates
