looking for a single regulator manifold?
- Thread starter Michael V
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
Welcome to the board Micheal. If you want a vintage one, your best bets are Ebay or Vintage Double Hose forum. Vintage Double Hose
Gilldiver
Contributor
This should do you with a set of old steel 72's or some aluminum 80's. Adding a set of Victor's bands will set you up real well.
Sherwood Manifold Double 2 Regulator 3000 psi Service - eBay (item 110332860807 end time Jan-31-09 20:35:21 PST)
There are some others, do a search for "Doubles Manidold" on the bay to find them. The rebuild of the Sherwood manifold is easy and you can turn the center section around to get this configuration.
Sherwood Manifold Double 2 Regulator 3000 psi Service - eBay (item 110332860807 end time Jan-31-09 20:35:21 PST)
There are some others, do a search for "Doubles Manidold" on the bay to find them. The rebuild of the Sherwood manifold is easy and you can turn the center section around to get this configuration.
Yes the Sherwood Selpac manifolds work well as the right post can be used for a bailout reg/octo.
In the one pictured above, the center bar is reversed and the right post is facing backwards on the left. It keeps the hose in tighter for the bungeed backup.
They are not all that vintage, dating to the 70's and 80's, bu they work great.
In the one pictured above, the center bar is reversed and the right post is facing backwards on the left. It keeps the hose in tighter for the bungeed backup.
They are not all that vintage, dating to the 70's and 80's, bu they work great.
