Issues pairing Mares LED Tank Module with Quad Air

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

JDubs09

Registered
Messages
16
Reaction score
2
Location
Boston, MA
I can't get the two to pair. I've tried a direct connection to the tank, which doesn't hold an air tight fit, so I bought a 6" high pressure hose to mount it on. Still can't get it to turn on and pair. The 6" hose leaks slightly at the attachment point to the pod, nothing worrisome, finished a full dive with no problems, but not sure if this is normal. Please help!
 
No specific help to offer, but general may do it:
Is the computer up to date with firmware?
Did you insert an HP air spool between the hose and the transmitter?
 
No specific help to offer, but general may do it:
Is the computer up to date with firmware?
Did you insert an HP air spool between the hose and the transmitter?

Does the Mares transmitter need an HP air spool?
 
Does the Mares transmitter need an HP air spool?
Not when connected directly to the 1st stage, but needed with the short hose. The swivel isn’t airtight without it.
 
https://www.shearwater.com/products/swift/

Back
Top Bottom