Interested in getting a pair of 6.5mm Semi-Dry boots, have question?

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

BORG

Contributor
Messages
602
Reaction score
62
Location
Tucker, Georgia, just northeast of Atlanta
# of dives
100 - 199
Hi guys,
I have a pair of Henderson Hyperstretch 7mm boots. They are good boots warmth wise, have just become too tight on me, especially when I'm walking to the water fully geared up. I bought the Hendersons a few years ago. I wear size 10 street and sport shoe size.
I've seen your 6.5mm Semi-Dry boot that the large is supposed to fit size 9-10.5. My foot is a little on the wide side too. Do you think I will be happy with a pair of your Semi-Dry 6.5mms? I also dive with Apollo Bio Fins, I guess the sole is about the same thickness as my Hendersons boots.

Thanks!

I'm of Swedish ancestry too, so this has to work, right? LOL
 
HI Borg-
The Orion or the B1 semo-dry boots typically run a size smaller than most boots, we would recommend trying a Large and a X-Large to compare and to find your desired fit.
The soles are lower profile and will fit the bio fin without issue.
 
https://www.shearwater.com/products/peregrine/

Back
Top Bottom