Inon Bayonet or flip adapter for the Olympus Em5 PT-EP08 port

[Divezilla]

Hi all

What's the best way to attach an Inon 165 AD macro lens to the Olympus EM5 housing ?
This one Olympus OM-D E-M5 Underwater Camera and Housing by Olympus

My Inon165 has the AD bayonet mount as well as a 67mm adapter.
I'd prefer a flip adapter or a proper Inon bayonet mount for ease of use under water

Thanks

 

[Reefwalker]

We have two adpators available that may help you:
1) Replaces the front of the Olympus PEN & OMD standard flat port (the red part) and transforms this into a 67mm thread. Then a wet macro lens can screw directly into it.
2) A swing away (flip mount) adaptor that attaches to the outside/front of the port, a 67mm threaded lens screws into this and then can be swung in/out as needed.
Check out on our website on the Reef Images Accessories page.

 

[Divezilla]

Thanks Jeff
Looks like these is lots of good info at your website.

Do you also make snoots for the ys01 strobes?

 

[Reefwalker]

Thanks Jeff
Looks like these is lots of good info at your website.

Do you also make snoots for the ys01 strobes?

Hi Divezilla
Sorry, we don't make "BluSnoot" Fiber Optic Snoots for the Sea & Sea YS-01 strobes. As there is only one (small) flash tube in these strobes, to place two flexible arms with the optical fibers inside, the arms need to be at the centre of the flash tube (otherwise not enough light travels up the fibers). But we need to have the two flex arms spaced to allow fitment. So the end result with my tests was that there is not enough light transmission with this model - Sorry !
We currently manufacture "BluSnoot" Fiber Optic Snoots for the Inon Z & D series strobes (Z240, Z220, D180, D2000) and the Sea & Sea YSD-1 strobes. See our website with details. Photo examples at my Flickr site.