id 1st stage
- Thread starter vega77
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
Still Kicking
Contributor
I'm not a Cressi expert but it looks like an AC2
Assuming this is correct, the service manual is attached.
Service kits appear to be readily available, for example (since the OP is in Europe):
Cressi AC2 First Stage Service Kit Scuba Diving Buy and Sales in Gidive Store
Cressi AC2 First Stage Service Kit
www.gidivestore.com
Still Kicking
Contributor
Soak the Aqualung purge cover in hot water before you try to remove it. The "ears" tend to get brittle with time and if they snap, you probably won"t find a replacement. You can get some life out the octo without a service kit by flipping over the seat if it hasn't been flipped before.
Not familiar with the AC2 but you can probably do the same with that as it's a flow-by piston.
Not familiar with the AC2 but you can probably do the same with that as it's a flow-by piston.
Similar threads
