Hollis LED 15 out of water?
- Thread starter jtsfour
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
Google much?
From page 5 of the manual:
Use of LED lamp out of water is not suggested for more than 30 seconds, however is suggested for Pre-Dive inspection. If used out of water for more than 5 minutes the LED can build excessive heat and will switch to a lower setting. This setting can be reset by switching the light off, then back on.
https://www.hollis.com/media/wysiwyg/HO/manuals/LED15CanisterLight_OwnersGuide.pdf
Thanks! Didn't think to look for an owners manual.
Thanks! I guess my google skills are off-par today.
Google much?
From page 5 of the manual:
Use of LED lamp out of water is not suggested for more than 30 seconds, however is suggested for Pre-Dive inspection. If used out of water for more than 5 minutes the LED can build excessive heat and will switch to a lower setting. This setting can be reset by switching the light off, then back on.
https://www.hollis.com/media/wysiwyg/HO/manuals/LED15CanisterLight_OwnersGuide.pdf
Thanks! I guess my google skills are off-par today.
If you don't find an owners manual link on a specific product page, next stop is to check to see if there is a "Manuals" or "Downloads" option under a Support menu.
Similar threads
