Soloist
Contributor
HOG 32# Black Scuba Wing with T2 Inflator Assembly, Low Pressure Hose and Extra HOG Valve
$125 Shipped (Continental US Only)
HOG (Highly Optimized Gear) 32lb Wing designed for performance and durability. An ideal choice for single cylinder diving with a backplate or soft pack harness system. It features a low profile 360 degree donut shape with an offset inflator hose elbow to eliminate interference with regulator first stages. The center of the HOG 32lb Wing features both large reinforced cam strap slots as well as 3 sets of bolt holes.
Heavy duty HOG wing in very good condition. Throughly cleaned inside and out after every dive trip. Includes T2 inflator with corrugated hose and a low pressure hose (looks new) to connect first stage. I am including an additional lightweight HOG inflator valve. All components have been inspected and tested.
***The center section has built in roll control tank stabilizers. I removed the plastic tube inserts for my Freedom Plate setup, however, I have since reinstalled the inserts and applied Tenacious Tape to the fabric (see picture). This modification is reflected in the price and has no effect on form or function of the wing.
32 pound buoyancy, 360 degree circular wing design
840 denier Black Cordura Nylon protective outer covering
Replaceable 420 Hi-tenacity denier TPU coated inner air bladder
18inch / 46cm rubber corrugated hose
28inch / 71.12 cm low pressure Rubber Inflator hose
3 sets of 11 inch on center corrosion resistant mounting holes
Integrated soft side single tank mounting plate
Built in roll control tank stabilizers
Low profile classic pull dump located on left inside hip
HOG T2 heavy duty tech inflator
$125 Shipped (Continental US Only)
HOG (Highly Optimized Gear) 32lb Wing designed for performance and durability. An ideal choice for single cylinder diving with a backplate or soft pack harness system. It features a low profile 360 degree donut shape with an offset inflator hose elbow to eliminate interference with regulator first stages. The center of the HOG 32lb Wing features both large reinforced cam strap slots as well as 3 sets of bolt holes.
Heavy duty HOG wing in very good condition. Throughly cleaned inside and out after every dive trip. Includes T2 inflator with corrugated hose and a low pressure hose (looks new) to connect first stage. I am including an additional lightweight HOG inflator valve. All components have been inspected and tested.
***The center section has built in roll control tank stabilizers. I removed the plastic tube inserts for my Freedom Plate setup, however, I have since reinstalled the inserts and applied Tenacious Tape to the fabric (see picture). This modification is reflected in the price and has no effect on form or function of the wing.
32 pound buoyancy, 360 degree circular wing design
840 denier Black Cordura Nylon protective outer covering
Replaceable 420 Hi-tenacity denier TPU coated inner air bladder
18inch / 46cm rubber corrugated hose
28inch / 71.12 cm low pressure Rubber Inflator hose
3 sets of 11 inch on center corrosion resistant mounting holes
Integrated soft side single tank mounting plate
Built in roll control tank stabilizers
Low profile classic pull dump located on left inside hip
HOG T2 heavy duty tech inflator
